Edgepave Concrete Paver

Edgepave Concrete Pavers are durable concrete pavers with a classic brickwork design, making them a practical choice for a range of outdoor applications. They are commonly used for pathways and walkways, garden edging, mower strips, patios and entertaining areas, courtyards, and garden paths.

No. We don't recommend using Edgepave Concrete Pavers for residential or commercial driveways. These pavers are designed primarily for pathways, mower strips, garden edging, and other pedestrian applications.

For driveways, we recommend using Drivepave or Interpave instead.

Installing Edgepave Concrete Pavers requires a properly prepared and compacted base to create a stable, long-lasting surface. The general installation process includes:

1. Measure and mark out the paving area.
2. Excavate and prepare the ground as required.
3. Install and compact a suitable base material.
4. Add and level the bedding layer.
5. Lay the pavers according to your chosen pattern.
6. Cut pavers where required around edges and corners.
7. Fill the joints with suitable paving sand.
8. Compact the finished surface.

Note: We recommend following the manufacturer's installation instructions for the specific requirements of your project. The guide above provides a general overview of the installation process.

The number of Edgepave Concrete Pavers required depends on the size of your paving area and the layout selected. Each paver measures 200 × 100 × 50mm, with approximately 50 pavers required per square metre.

To calculate the quantity needed, measure your paving area in square metres and multiply this by 50 pavers per m².

Note: We recommend allowing an additional 5–10% for cuts, breakages, installation adjustments, and future replacements. For irregularly shaped areas or more complex paving patterns, additional pavers may be required.